5 degree unslotted bridge pins
Nicely fitting bridge pins can make a noticeable improvement to the sound of a guitar. These are standard 5 degree taper, unslotted.
Bone pins can produce a slightly brighter sound than wooden pins. Ebony is an all-time favourite, and snakewood is a hardwood from Surinam which turns and polishes well.
5 degree pin dimensions
Bone, 5 degree, unslotted, abalone dot
A: 1.000" 25.40mm
B: 0.220" 5.59mm
C: 0.133" 3.38mm
£
Bone, 5 degree, unslotted, black dot
A: 1.000" 25.40mm
B: 0.220" 5.59mm
C: 0.133" 3.38mm
£
Bone, 5 degree, unslotted, no dot
A: 1.000" 25.40mm
B: 0.220" 5.59mm
C: 0.133" 3.38mm
£
Ebony, 5 degree, unslotted, abalone dot
A: 1.000" 25.40mm
B: 0.220" 5.59mm
C: 0.133" 3.38mm
£
Ebony, 5 degree, unslotted, no dot
A: 1.000" 25.40mm
B: 0.220" 5.59mm
C: 0.133" 3.38mm
£
Ebony, 5 degree, unslotted, oversized, no dot
A: 1.000" 25.40mm
B: 0.235" 5.97mm
C: 0.150" 3.81mm
£
Ebony, 5 degree, unslotted, pearl dot
A: 1.000" 25.40mm
B: 0.220" 5.59mm
C: 0.133" 3.38mm
£
Ebony, 5 degree, unslotted, white dot
A: 1.000" 25.40mm
B: 0.220" 5.59mm
C: 0.133" 3.38mm
£
Tenor guitar, ebony, 5 degree, unslotted, no dot
A: 1.000" 25.40mm
B: 0.220" 5.59mm
C: 0.133" 3.38mm
£
Tenor guitar, bridge pins, ebony, unslotted, pearl dot, 5 degree
A: 1.000" 25.40mm
B: 0.220" 5.59mm
C: 0.133" 3.38mm
£