The Trinity Pro Classic Solo provides the same spec as the Trinity Pro Classic system, but without the Trinity Pro Preamp and 6-foot stereo cable. It is for players who already have a Trinity system and want to install a similar setup in a second guitar, or who want to use another type of external preamp.

It is a dual source pickup/internal mic system with a dual-channel preamp for steel-string guitars. The three-head, bridge plate pickup is based on the same technology as K&K's Pure pickup. The Trinity Microphone features an integrated 5" gooseneck (allowing it to be positioned in a number of ways, including outside the soundhole) and 20-20,000 Hz frequency range.

The mic adds some extra air and shimmer to the overall sound, which is very beneficial to the purely acoustic guitarist. The mic can be included in the mix as much as the situation allows for, using the preamp's controls. As a general rule, the lower the stage volume, the more mic can be blended in. This system is great for home recordings too!

Please note that the mic is now connected via inline connectors rather than hard-wired as shown in the illustration.

The 1/2" diameter Classic pickups will fit ANY steel string acoustic guitar. Direct installation with superglue is required for optimum performance but the system is still removable without damaging the guitar (you may damage the pickup though). Installing the pickups is a breeze with the included mounting jig, detailed instructions, and superglue.