Vinyl pickguards - Martin styles
Good-quality replacement Martin-style pickguards. Vinyl sheet, patterned to resemble antique tortoise shell, etc. All edges are bevelled (angled). Backed with 3M 467 adhesive film, ready for fitting.
Available in Little Martin, dreadnought (D-18/D-28) OM, 00 and 000 styles. We often get asked for pickguards to fit Little Martins - they are not available from the usual sources. A good pickguard definitely improves the look! These are hand-made to fit Little Martins and similar guitars with a soundhole radius of 1 13/16" and a soundhole purfling ring radius of 2 1/32".
Please check out our templates page before ordering. Using a template is the best way to ensure a good fit, due the compound curves involved. Our templates also give the diameter of the soundhole rings they fit in inches and mm.
30s vintage tortoise
0.7mm (0.025")
black
0.9mm (0.035")
black, left-handed
0.9mm (0.035")
brown tortoise
0.7mm (0.025")
brown tortoise, left-handed
0.7mm (0.025")
dark brown tortoise
0.7mm (0.025")
dark red tortoise
0.7mm (0.025")
red firestripe
0.7mm (0.025")
red firestripe, left-handed
0.7mm (0.025")
red tortoise
0.7mm (0.025")
red tortoise, left-handed
0.7mm (0.025")
yellow tortoise
0.7mm (0.025")
30s vintage tortoise
0.7mm (0.025")
black
0.9mm (0.035")
brown tortoise
0.7mm (0.025")
dark red
0.7mm (0.025")
medium tortoise
0.7mm (0.025")
red tortoise
0.7mm (0.025")
yellow tortoise
0.7mm (0.025")
30s vintage tortoise
0.7mm (0.025")
black
0.9mm (0.035")
brown tortoise
0.7mm (0.025")
brown tortoise, left-handed
0.7mm (0.025")
dark brown tortoise
0.7mm (0.025")
dark red tortoise
0.7mm (0.025")
red firestripe
0.7mm (0.025")
red tortoise
0.7mm (0.025")
yellow tortoise
0.7mm (0.025")
yellow tortoise, left-handed
0.7mm (0.025")
brown tortoise
0.7mm (0.025")
red tortoise
0.7mm (0.025")
brown tortoise
0.7mm (0.025")
red tortoise
0.7mm (0.025")
brown tortoise
0.7mm (0.025")
red tortoise
0.7mm (0.025")